PAH200H48 Datasheet, PDF (1/1 Pages) DENSEI-LAMBDA – High current High Efficieny Single Output 200W

PAH200H-SERIES High current High Efficieny Single Output 200W
Standard Model
Baseplate Model
Ⅵ Model name
PAH 200 H 48-1R8/
Series Name
High
Rated output
Current
voltage
Output
Wattage
Rated input
voltage
Option:
blank: On/Off control Negative logic
OVP manual reset
P: On/Off control Positive logic
OVP manual reset
V: On/Off control Negative logic
OVP auto-recovery
PV: On/Off control Positive logic
OVP auto-recovery
B: Baseplate type
C: 1 output terminal type
Ⅵ Features
ⅷ Low output voltage and high current line-up:
ⅷ Low-profile type: 10.2mm high
ⅷ No need heat sinks: Convection cooling/ forced air
cooling operation
ⅷ Wide range of operating temperature: -40ºC to +85ºC
2 year warranty
Ⅵ Specifications
1. Input voltage range 36 - 76VDC (100VDC, 100ms)
2. Output voltage range PAH200H48-2R5, PAH200H48-1R8:-20%, +10% PAH200H48-3R3:×¢15%
3. Line regulation
10mV
4. Load regulation
5. Cooling
10mV
Convection cooled / Forced air cooled
6. Operating ambient
temperature
Ta = -40ºC ~ +85ºC (Output derating to be caused depending on temperature condition)
7. Withstand voltage
8. Safety standard
9. Functions
Ⅵ Product lineup
Model name
Input-Output : 1.5kVAC (20mA) for 1min
Approved by UL60950, CSA60950
and EN60950
On/Off control, Overcurrent protection, Overvoltage protection, Overtemperature protection
Input Voltage
Output voltage
Output current
Efficiency
PAH200H48-1R2
1.2V
70A
82%
PAH200H48-1R5
1.5V
70A
84%
PAH200H48-1R8
48VDC (36~76V)
1.8V
70A
87%
PAH200H48-2R5
2.5V
70A
88%
PAH200H48-3R3
3.3V
60A
90%
ⅷ Request customer specification for further details of specifications, outline, characteristics, etc.
Read the instruction manual before usage.
ⅷ Contact us about delivery before ordering.
ⅷ PAH200H48-1R2 and PAH200H48-1R5 will be released in the spring of 2003.
Ⅵ Outline drawing(STD Model) For 1 output terminal type and Baseplate type, outline drawing differs from the following.
Please see DENSEI-LAMBDA web site.
= NOTE =
A:Model name.country of manufacture. Lot No.
and safety marking (BSI, C-UL-US & CE marking)
B:Output pin of +V and -V : 4-ø2.0
C:Signal and Input pin : 6-ø1.0
(Unit: mm)
106