KYL-300M Datasheet, PDF (6/14 Pages) SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD. – KYL-300MRF Data RadioModule

Shenzhen KYL Communication Equipment Co., Ltd
RF module
4. Setting of channel, interface, and data format
Before using KYL-300M, the user needs to make simple configuration based on
its own needs to determine the channel, interface mode and data format. The user
can change or view the module's interface baud rate, channel and address code.
Parameter setting or reading as per the testing software KYLCOM in the PC (in
products box).And the configuration is as follows:
i. Channel configuration:
Channel No.
Frequency
Channel No.
Frequency
1
429.0325MHZ
5
433.0325MHZ
2
430.0325MHZ
6
434.0325MHZ
3
431.0325MHZ
7
435.0325MHZ
4
432.0325MHZ
8
436.0325MHZ
Note: the frequency points corresponding to each channel can be adjusted
based on the user’s needs.
ii. The schematic diagram of setting the parameter as follows:
a. Connect the PC and module with RS232 data cable.
b. Open the “KYLCOM” PC software, select “English” as follows:
Fax: [phone] [e-mail] www.rf-data.com
6