2551 Datasheet, PDF (2/2 Pages) KR Electronics, Inc. – Bandpass Filter

KR Electronics 2551 Bandpass
Specifications
Parameter
Filter type
Center Frequency
Insertion Loss
Min 1 dB Bandwidth
Attenuation at 13.975 MHz & below
Attenuation 76.475 MHz
Source and Load
Specification
Bandpass
35 MHz
< 6 dB (< 1 dB typical)
22 MHz
> 40 dB
> 40 dB
50 Ω
KR Electronics, Inc.
www.krfilters.com
Physical Dimensions
Notes:
1. Surface mount package — Metal cover, open frame
2. Dimensions in inches
3. Use SN60 or SN63 solder during installation
4. If boards are cleaned after installation, units must be completely
dried to remove any entrapped moisture that will effect electrical
performance
KR Electronics, Inc.
91 Avenel Street
Avenel, NJ 07001
Web
Email
Phone
Fax
© 2004, KR Electronics, Inc.
www.krfilters.com
[e-mail]
[phone]
[phone]
Page 2