KK4053B Datasheet, PDF (2/7 Pages) KODENSHI KOREA CORP. – Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS

KK4053B
MAXIMUM RATINGS^*
Symbol
Parameter
Value
Unit
V_CC DC Supply Voltage (Referenced to GND)
V_IN DC Input Voltage (Referenced to GND)
I_IN
DC Input Current, per Pin
P_D Power Dissipation in Still Air
-0.5 to +20
V
-0.5 to V_CC +0.5
V
±10
mA
500*¹
mW
P_tot Power Dissipation per Output Transistor
Tstg Storage Temperature
100
mW
-65 to +150
°C
T_L Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
(Plastic DIP or SO Package)
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
*¹ - for Plastic DIP from -55° to +100°C, for SO Package from -55° to +65°C.
+Derating - Plastic DIP: - 12 mW/°C from 100° to 125°C
SO Package: - 7 mW/°C from 65° to 125°C
RECOMMENDED OPERATING CONDITIONS
Symbol
V_CC
V_IN
T_A
Parameter
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
Operating Temperature, All Package Types
Min Max Unit
3.0
18
V
0
V_CC
V
-55
+125
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, V_IN and V_OUT should be constrained to the range GND≤(V_IN or
V_OUT)≤V_CC.
Unused digital pins must be tied to an appropriate logic voltage level (e.g., either GND or V_CC). Unused
Analog I/O pins may be left open or terminated.
2