KSM-911SY1E Datasheet, PDF (1/2 Pages) KODENSHI KOREA CORP. – Optic receiver module

Optic receiver module
KSM-91 SY1E
The KSM-91 SY1E consist of a PIN Photodiode of high
speed and a preamplifier IC in the package as an receiver
for Infrared remote control systems
DIMENSIONS
Features
Wide angle design
Wide supply-voltage range : 2.7V to 5.5V
Shielded against electrical field disturbance
High immunity against ambient light disturbances
(Logic Controller Adaptation)
Available for carrier frequencies between 32.7KHz to 56.9KHz
TTL and CMOS compatible
Applications
Audio & Video Applications (TV, VTR, Audio, DVDP, CDP)
Home Appliances (Air conditioner, Computer, Camcoder)
Wireless Toys
Remote Control Equipment
Maximum Ratings
Parameter
Supply Voltage
Operating Temperature
Storage Temperature
Soldering Temperature
Symbol
Vcc
Topr
Tstg
Tsol
Ratings
6.0
-10 ~ +60
-20 ~ +75
260
(Max 5 sec)
[Ta=25 ]
Unit
V
B.P.F Center Frequency
Model No.
KSM-911SY1E
KSM-912SY1E
KSM-913SY1E
KSM-914SY1E
KSM-915SY1E
B.P.F Center Frequency( )
40.0
36.7
37.9
32.7
56.9
Electro-Optical Characteristics
Parameter
Recommended Supply Voltage
Current Consumption
Peak Wavelength
*1
B.P.F Center Frequency
Transmission Distance
*1
High level Output voltage
*1
Low level Output voltage
*1
High level Output Pulse Width *1
Low level Output Pulse Width *1
Output Form
Symbol
Vcc
Icc
p
fo
L
V_OH
V_OL
T_WH
T_WL
Condition
[Ta=25 , Vcc=5.0V(Vcc=3.0V)]
Min.
Typ.
Max.
Unit
2.7
-
5.5
V
No signal input
0.5
1.2(1.0)
1.7
-
940
-
-
37.9
-
0
15
-
250 50lx
30
12
-
-
m
-
30cm over
4.5(2.8)
5.0(3.0)
-
V
the ray axis
-
0.1
0.5
V
Burst wave=600
500
600
700
Period = 1.2
500
600
700
Active Low Output
*1. It specifies the maxmum distance between emitter and detector that the output wave form satisfies the standard under the conditions
below against the standard transmitter.
1) Measuring place : Indoor without extreme reflection of light
2) Ambient light source : Detecting surface illumination shall be irradiate 200 50lx under ordinary white fluorescence lamp without
high frequency lightning
3) Standard transmitter : Burst wave of standard transmitter shall be arranged to 50mVP-P under the measuring circuit
1/2