KRT-11XS14N Datasheet, PDF (1/3 Pages) KODENSHI KOREA CORP. – Optical Monitoring Photodiode TO CAN for KRT-11XSx4N

Optical Monitoring Photodiode TO CAN for KRT-11XSx4N
KRT-11XSx4N
Description
KRT-11XSx4N is InGaAs PIN Photodiode TO CAN package with BIG size PD active diameter(Ø1.0 , Ø2.0 , Ø3.0mm)
It is recommended for Laser diode life test and optical power monitoring.
KRT -11XSx4N series operate at both 0.9um and 1.6um wavelength range .
Features
● 3(2) pin TO CAN package with hermetically sealed PIN PD
● _{Wide operating temperature range from –40℃ to 85℃}
● _{High performance and high reliability InGaAs PIN PD}
● _{Wide operating wavelength range from 0.9um to 1.6um}
Applications
● _{Laser diode power monitoring}
● Laser diode life test
● Counterfeiting money Sensing Sensor.
● Optical switch
KRT-11XS14N
KRT-11XS24N
KRT-11XS34N
Absolute Maximum Ratings
Parameter
Symbol
Ratings
Unit
Reverse Voltage
V_{R max.}
10
V
Operating Temperature
T_opr
-40 ~ +85
℃
Storage Temperature
T_stg.
-40 ~ +100
℃
Soldering Temperature *1
T_sol.
270
℃
*1 : Soldering Time ≤ 10 seconds (At a distance of 1 mm from the package).
Electro-Optical Characteristics
Parameter
Symbol Unit
KRT-11XS14N KRT-11XS24N KRT-11XS34N
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
Active area
Ø
㎜
1.0
2.0
3.0
Dark Current
I_D
nA
1.0 5.0
2.0 10.0
10.0 50.0
Responsivity ^1.31um S mA/mW ^0.85
0.85
0.85
1.55um
0.90
0.90
0.90
3dB Cut off frequency f_C
Terminal Capacitance C_T
MHz 18 35 - 4 8 - 2 4 -
pF
90 150
250 500
550 1000
* These specifications are subject to change without notice.
Condition
@ V_R=5V, 25℃
@ V_R=5V, 25℃
@V_R=5V, RL=50Ω
@ V_R=5V, f=1MHz
Ordering information
KRT
Device Type Data Rate
KODENSHI
Receiver
TO CAN
1 : PIN-PD
1 : Monitoring
2 : PIN-TIA
2 : 155 Mbps
6 : Analog PIN PD 3 : 1.25 Gbps
4 : 2.5 Gbps
5 : 5Gbps
Oper.
Voltage
Active Area
Cap Type
1 : 3.3 V 1 : Ø50 um 1 : long ball lens cap
2 : 5 V 2 : Ø75 um 2 : short ball lens cap
3 : 3.3/5 V 3 : 250 um sq. 3 : long flat window cap
x : NA S1 : Ø1.0 mm 4 : short flat window cap
S2 : Ø2.0 mm
S3 : Ø3.0 mm
Pin Config.
3(2) 4 5
C PA
C1 D B
W IJ
H TK
M
The engineering spec can be revised without any previous notice.
When customer's applying, please request us a revised specification before submitting the specification to the customers.
For more information on other parts available, please visit our website: www.kodenshi.co.kr
KODENSHI KOREA Corp. 513-5 Eoyang-Dong, Iksan, 570-210, Korea
1/3
Rev.001