KK9151-3 Datasheet, PDF (1/7 Pages) KODENSHI KOREA CORP. – PULSE DIALER

TECHNICAL DATA
PULSE DIALER
KK9151-3
The KK9151-3 pulse dialer is a monolithic CMOS integrated circuit which
converts pushbutton inputs to a series of pulses suitable for telephone dialing.
It is intended to replace mechanical telephone dialers and can operate directly
from telephone lines. CMOS technology is used to produced this device,
resulting in very low power requirements and high noise immunity. The
KK9151-3 can be easily interfaced with a variety of telephones, requiring only
a minimal number of external components.
• Direct telephone line operation
• 4 x 3 matrix keyboard interface
• Supply voltage range of 2.0 to 5.5 volts
• Inexpensive RC oscillator
ORDERING INFORMATION
KK9151-3N Plastic
T_A = -20° to 70° C for package
• Low power standby mode for redialing
• 22-digit redial memory
• Redial with either * or # key
• Dialer reset for line power breaks > 200 ms
• Selectable make/break ratio
• High speed test capacity
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 5 = V_CC
PIN 12 = GND
KEYBOARD ASSIGNMENT
R1 1 2 3
R2 4 5 6
R3 7 8 9
R4 * 0 #
C1 C2 C3
(*,# : Redial)