KK74HC595A Datasheet, PDF (1/10 Pages) KODENSHI KOREA CORP. – 8-Bit Serial-Input/Serial or Parallel-Output Shift Register with Latched 3-State Outputs High-Performance Silicon-Gate CMOS

TECHNICAL DATA
8-Bit Serial-Input/Serial or
Parallel-Output Shift Register
with Latched 3-State Outputs
High-Performance Silicon-Gate CMOS
KK74HC595A
The KK74HC595A is identical in pinout to the LS/ALS595. The
device inputs are compatible with standard CMOS outputs; with pullup
resistors, they are compatible with LS/ALSTTL outputs.
The KK74HC595A consists of an 8-bit shift register and an 8-bit D-
type latch with three-state parallel outputs. The shift register accepts serial
data and provides a serial output. The shift register also provides parallel
data to the 8-bit latch. The shift register and latch have independent clock
inputs. This device also has an asynchronous reset for the shift register.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA
• High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION
KK74HC595AN Plastic
KK74HC595AD SOIC
T_A = -55° to 125° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16 =V_CC
PIN 8 = GND
1