|
KK74ACT620 Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – Octal 3-State Inverting Bus Transceiver High-Speed Silicon-Gate CMOS | |||
|
TECHNICAL DATA
Octal 3-State Inverting
Bus Transceiver
High-Speed Silicon-Gate CMOS
KK74ACT620
The KK74ACT620 is identical in pinout to the LS/ALS620,
HC/HCT620. The KK74ACT620 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
The KK74ACT620 is a 3-state transceiver that is used for 2-way
communication between data buses. Two separate enables are available.
The enable for bus A to B is active-high, the enable for bus B to A is
active-low.
⢠TTL/NMOS Compatible Input Levels
⢠Outputs Directly Interface to CMOS, NMOS, and TTL
⢠Operating Voltage Range: 4.5 to 5.5 V
⢠Low Input Current: 1.0 µA; 0.1 µA @ 25°C
⢠Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74ACT620N Plastic
KK74ACT620DW SOIC
TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 20=VCC
PIN 10 = GND
FUNCTION TABLE
Control Inputs
Output Direction
Enable
L
L
H
H
H
L
L
H
Operation
Data Transmitted
from Bus B to
Bus A (inverted)
Data Transmitted
from Bus A to
Bus B (inverted)
Buses Isolated
(High Impedance
State)
1
|
▷ |