KK74ACT374 Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – Octal 3-State Noninverting D Flip-Flop High-Speed Silicon-Gate CMOS

TECHNICAL DATA
Octal 3-State
Noninverting D Flip-Flop
High-Speed Silicon-Gate CMOS
KK74ACT374
The KK74ACT374 is identical in pinout to the LS/ALS374,
HC/HCT374. The KK74ACT374 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
Data meeting the setup and hold time is clocked to the outputs with
the rising edge of the Clock. The Output Enable input does not affect the
states of the flip-flops, but when Output Enable is high, the outputs are
forced to the high-impedance state; thus, data may be stored even when
the outputs are not enabled.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74ACT374N Plastic
KK74ACT374DW SOIC
T_A = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Output
Enable
L
L
L
Inputs
Clock
L,H,
H
X
X = don’t care
Z = high impedance
Output
D
Q
H
H
L
L
X
no
change
X
Z
1