KK74ACT253 Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – Dual 4-Input Data Selector/Multiplexer with 3-State Otputs High-Speed Silicon-Gate CMOS

TECHNICAL DATA
Dual 4-Input Data Selector/Multiplexer
with 3-State Otputs
High-Speed Silicon-Gate CMOS
KK74ACT253
The KK74ACT253 is identical in pinout to the LS/ALS253,
HC/HCT253. The KK74ACT253 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
The Address Inputs select one of four Data Inputs from each
multiplexer. Each multiplexer has an active-low Output Enable control
and a three-state noninverting output.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74ACT253N Plastic
KK74ACT253D SOIC
T_A = -40° to 85° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 16 =V_CC
PIN 8 = GND
FUNCTION TABLE
Inputs
Output
A1 A0 Output Y
Enable
XX
H
Z
LL
L
D0
LH
L
D1
HL
L
D2
HH
L
D3
D0,D1...D3=the level of the respective
Data Input
Z = high impedance
X = don’t care
1