KK74ACT251 Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – 8-Input Data Selector/Multiplexer with 3-State Outputs High-Speed Silicon-Gate CMOS

TECHNICAL DATA
8-Input Data Selector/Multiplexer
with 3-State Outputs
High-Speed Silicon-Gate CMOS
KK74ACT251
The KK74ACT251 is identical in pinout to the LS/ALS251,
HC/HCT251. The KK74ACT251 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
The device selects one of the eight binary Data Inputs, as determined
by the Address Inputs. The Output Enable pin must be at a low level for
the selected data to appear at the outputs. If Output Enable is high, the Y
and the Y outputs are in the high-impedance state. This 3-State feature
allows the KK74ACT251 to be used in bus-oriented systems.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74ACT251N Plastic
KK74ACT251D SOIC
T_A = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16 =V_CC
PIN 8 = GND
FUNCTION TABLE
Inputs
Outputs
A2 A1 A0 Output Y Y
Enable
XX X
H
ZZ
LL L
L D0 D0
LL H
L D1 D1
LH L
L D2 D2
LH H
L D3 D3
HL L
L D4 D4
HL H
L D5 D5
HH L
L D6 D6
HH H
L D7 D7
D0,D1...D7=the level of the respective D
input
Z = high-impedance state
X = don’t care
1