KK74AC574 Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – Octal 3-State Noninverting D Flip-Flop High-Performance Silicon-Gate CMOS

TECHNICAL DATA
Octal 3-State
Noninverting D Flip-Flop
High-Performance Silicon-Gate CMOS
KK74AC574
The KK74AC574 is identical in pinout to the LS/ALS574,
HC/HCT574. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
Data meeting the setup time is clocked to the outputs with the rising
edge of the Clock. The Output Enable input does not affect the states of
the flip-flops, but when Output Enable is high, all device outputs are
forced to the high-impedance state; thus, data may be stored even when
the outputs are not enabled.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• High Noise Immunity Characteristic of CMOS Devices
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74AC574N Plastic
KK74AC574DW SOIC
T_A = -40° to 85° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Output
Enable
L
L
L
Inputs
Clock
L,H,
H
X
X = don’t care
Z = high impedance
Output
D
Q
H
H
L
L
X
no
change
X
Z
1