KK74AC251 Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – 8-Input Data Selector/Multiplexer with 3-State Outputs High-Speed Silicon-Gate CMOS

TECHNICAL DATA
8-Input Data Selector/Multiplexer
with 3-State Outputs
High-Speed Silicon-Gate CMOS
KK74AC251
The KK74AC251 is identical in pinout to the LS/ALS251,
HC/HCT251. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
The device selects one of the eight binary Data Inputs, as determined
by the Address Inputs. The Output Enable pin must be at a low level for
the selected data to appear at the outputs. If Output Enable is high, the Y
and the Y outputs are in the high-impedance state. This 3-State feature
allows the KK74AC251 to be used in bus-oriented systems.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• High Noise Immunity Characteristic of CMOS Devices
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74AC251N Plastic
KK74AC251D SOIC
T_A = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16 =V_CC
PIN 8 = GND
FUNCTION TABLE
Inputs
Outputs
A2 A1 A0 Output Y Y
Enable
XX X
H
ZZ
LL L
L D0 D0
LL H
L D1 D1
LH L
L D2 D2
LH H
L D3 D3
HL L
L D4 D4
HL H
L D5 D5
HH L
L D6 D6
HH H
L D7 D7
D0,D1...D7=the level of the respective D
input
Z = high-impedance state
X = don’t care
1