KK4060B Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – 14-Stage Ripple-Carry Binary Counter/Divider and Oscillator High-Voltage Silicon-Gate CMOS

TECHNICAL DATA
14-Stage Ripple-Carry Binary
Counter/Divider and Oscillator
High-Voltage Silicon-Gate CMOS
KK4060B
The KK4060B consists of an oscillator section and 14 ripple-carry
binary counter stages. The oscillator configuration allows design of either
RC or crystal oscillator circuits. A RESET input is provided which resets
the counter to the all-Q’s state and disables the oscillator. A high level on
the RESET line accomplishes the reset function. All counter stages are
master-slave flip-flops. The state of the counter is advanced one step in
binary order on the negative transition of OSC In (and OSC Out). Schmitt
trigger action on the input-pulse line permits unlimited input-pulse rise
and fall times.
• Operating Voltage Range: 3.0 to 18 V
• Maximum input current of 1 µA at 18 V over full package-temperature
range; 100 nA at 18 V and 25°C
• Noise margin (over full package temperature range):
1.0 V min @ 5.0 V supply
2.0 V min @ 10.0 V supply
2.5 V min @ 15.0 V supply
ORDERING INFORMATION
KK4060BN Plastic
KK4060BD SOIC
T_A = -55° to 125° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16=V_CC
PIN 8= GND
FUNCTION TABLE
Inputs
Osc In Reset
L
L
X
H
Outputs
Q
No change
Advance to
next state
All Outputs
are low
X = don’t care
1