KK358 Datasheet, PDF (1/6 Pages) KODENSHI KOREA CORP. – Low Power Dual Operational Amplifier

TECHNICAL DATA
Low Power Dual Operational Amplifier
KK358
The KK358 contains two independent high gain operational amplifiers
with internal frequency compensation. The two op-amps operate over a wide
voltage range from a single power supply. Also use a split power supply. The
device has low power supply current drain, regardless of the power supply
voltage. The low power drain also makes the KK358 a good choice for battery
operation.
When your project calls for a traditional op-amp function, now you can
streamline your design with a simple single power supply. Use ordinary
+5VDC common to practically any digital system or personal computer
application, without requiring an extra 15V power supply just to have the
interface electronics you need.
The KK358 is a versatile, rugged workhorse with a thousand-and-one
uses, from amplifying signals from a variety of transducers to dc gain blocks,
or any op-amp function. The attached pages offer some recipes that will have
your project cooking in no time.
• Internally frequency compensated for unity gain
• Large DC voltage gain: 100dB
• Wide power supply range:
3V ~ 32V (or ±1.5V ~ ±16V)
• Input common-mode voltage range includes ground
• Large output voltage swing: 0V DC to V_CC-1.5V DC
• Power drain suitable for battery operation
• Low input offset voltage and offset current
• Differential input voltage range equal to the power supply voltage
• Possible to exchange the position of Pin9 for Pin1 because of Pin
Connection being symmetric(KK358S only)
ORDERING INFORMATION
KK358N Plastic
KK358D SOIC
KK358S SIP-8
T_A = -40° to 85° C for all packages.
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 4 = GND
PIN 8=V_CC
1