|
KK24LC16 Datasheet, PDF (1/3 Pages) KODENSHI KOREA CORP. – 16K Serial EEPROM with I2C bus | |||
|
TECHNICAL DATA
16K Serial EEPROM with I2C bus
KK24LC16
DESCRIPTION
The KK24LC16 is a 16K bit Electrically Erasable PROM. The chip is organized as eight blocks of 256 x 8 bit
memory with a 2-wire serial interface. Low voltage design permits operation down to 2.5 volts with standby and
active currents of only 5 µA and 1 mA respectively. The IZ24LC16B also has a page-write capability for up to 16
bytes of data.
FEATURES
⢠Single supply with operation down to 2.5V
⢠Low power CMOS technology
- 1 mA active current typical
- 10 µA standby current typical at 5.5V
- 5 µA standby current typical at 3.0V
⢠Organized as 8 blocks of 256 bytes (8 x 256 x 8)
⢠2-wire serial interface bus, I2C compatible
⢠Schmitt trigger inputs for noise suppression
⢠Output slope control to eliminate ground bounce
⢠100 kHz (E-temp) and 400 kHz (C/I-temp) compatibility
⢠Self-timed write cycle (including auto-erase)
⢠Page-write buffer for up to 16 bytes
⢠2 ms typical write cycle time for page-write
⢠Hardware write protect for entire memory
⢠Can be operated as a serial ROM
⢠1,000,000 erase/write cycles guaranteed
⢠Data retention > 200 years
⢠Temperature range -40oC to +85oC
PACKAGE
TA = -40 ... +85 °C
Figure 1. Representative Block Diagram
1
|
▷ |