KK24LC02B Datasheet, PDF (1/10 Pages) KODENSHI KOREA CORP. – 2K 2.5V CMOS Serial EEPROMs

TECHNICAL DATA
2K 2.5V CMOS Serial EEPROMs
KK24LC02B
DESCRIPTION
KK24LC02B is a 2K-bit Electrically Erasable PROM. The device is organized as a single
block of 256 x 8 bit memory with a two wire serial interface.
Low voltage design permits operation down to 2.5volts with standby and active currents
of only 5µA and 1mA respectively.
The KK24LC02B also has a page-write capability for up to 8 bytes of data.
The KK24LC02B is available in the standard 8-pin DIP.
FEATURES
• Single supply with operation down to 2.5V
• Low power CMOS technology
- 1 mA active current typical
- 10 µA standby current typical at 5.5V
- 5 µA standby current typical at 3.0V
• Organized as a single block of 256 bytes (256x8)
• Two wire serial interface bus, I²C compatible
• Schmitt trigger, filtered inputs for noise suppression
• Output slope control to eliminate ground bounce
• 100 kHz (2.5V) and 400 kHz (5V) compatibility
• Self-timed write cycle (including auto-erase)
• Page-write buffer for up to 8 bytes
• 2 ms typical write cycle time for page-write
• Hardware write protect for entire memory
• Can be operated as a serial ROM
• Factory programming (QTP) available
• ESD protection > 3,000V
• 1,000,000 ERASE/WRITE cycles guaranteed*
• Data retention > 200 years
PACKAGE
T_A = -40 ... +85 °C
PINNING
Name
Function
Vss
Ground
SDA
Serial Address/Data I/O
SCL
Serial Clock
WP
Write Protect Input
VCC
+2.5V to 5.5V Power Supply
AO, A1, A2 No Internal Connection
Pin Connection
A0 ₁
A1 ₂
A2 ₃
Vss ₄
8 ^Vcc
7 ^WP
6 ^SCL
5 ^SDA
1