KK1705 Datasheet, PDF (1/10 Pages) KODENSHI KOREA CORP. – Micro Monitor Supply Control

TECHNICAL DATA
Micro Monitor Supply Control
KK1705
The KK1705 is designed to control power supply and to start mi-
crocontroller and microprocessor systems. It is used for securing
stable functioning of the system when starting and halting the device
as well as in the case of the supply voltage drops.
Manufactured in 8-pin SOIC/DIP package MS-012AA.
LSI features:
• rated supply voltage 5.0 V;
• generation of reset signal when power supply is on for
correct start of microprocessor;
• generation of reset signal when power supply drops below
the operating one to avoid incorrect functioning of
microprocessor;
• generation of reset signal when pushing reset button;
• possibility to program threashold voltage
at which reset signal is generated.
ORDERING INFORMATION
KK1705N Plastic
KK1705D SOIC
T_A = -40° to 85° C for all packages.
The IN1705 contains a source of reference voltage,
two analog comparators, watchdog timer, digital sampler,
digital delay..
Functions:
• generation of reset signal per fixed level of supply
voltage;
• generation of reset signal from external “Reset” button;
• generation of signal of watchdog timer status;
• emergency interruption of primary power source.
PBRST 1
Vcc 2
GND 3
IN 4
8 WDS
7 RST
6 ST
5 NMI
Fig. 2 – Pin assignment
1