CPCN1502 Datasheet, PDF (2/2 Pages) KOA Speer Electronics, Inc. – Fixed Ceramics Resistor

KOA SPEER ELECTRONICS, INC.
4.1. Derating Curve
100
80
60
40
20
0
-60 -40 -20 0 20 40 60 80 100 120 140 160 180 200
Ambient Temperature
(°C)
SS-246 R4
5. Characteristics
Parameter
Requirement Δ R
Limit
Typical
Test Method
Resistance
Resistance
Within regulated
—
1kΩ, 5kΩ
tolerance
10kΩ, 15kΩ
Measurement Voltage
10V
30V
T.C.R.
-1200±300ppm/°C —
+25°C/-40°C and +25°C/+125°C
Voltage Coefficient
0 ~ -0.2%/V
—
Rated voltage and rated voltage x 10%
Overload
±2%
±0.3% Rated voltage x 2.5 or max. overload voltage for 5 seconds, whichever is less
Load Life at High Voltage Pulse
±30%
—
Continuous 250h high voltage pulse on the test circuit (Refer to JIS D5111)
Type
Holding Distance Time
Force
Resistor Body Strength
No mechanical
damages
CPCN1/2
—
CPCN1
CPCN2N
CPCN3
5.0 ± 0.2mm
9.0 ± 0.3mm
12.3 ± 0.3mm
10 seconds
98N (10kgf)
490N (50kgf)
Rapid Change of Temperature
±5.0%
±5.0% -55°C (15 minutes), +155°C (15 minutes), 500 cycles
Moisture Resistance
±5.0%
±0.9% 40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
Load Life
±5.0%
±0.7% 40°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
Low Temperature Operation
±5.0%
±0.7% -40°C, 24 hours
High Temperature Exposure
±5.0%
±2.0% +200°C, 1000 hours
The resistance measurement before and after the examination should be performed in room temperature with difference ±1°C.
PAGE 2 OF 2
Bolivar Drive ^■ P.O. Box 547 ^■ Bradford, PA 16701 ^■ USA ^■ 814-362-5536 ^■ Fax [phone] ^■ www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.