TLR1EDTP2L00F Datasheet, PDF (1/2 Pages) KOA Speer Electronics, Inc. – metal plate chip type low resistance resistor

NEW
TLR
metal plate chip type low resistance resistor
EU
features
• SMD type of small size, metal plate low
resistance resistor for current detection
• Low height suitable for use of small equipment such
as mobile phone
• High reliability and performance with T.C.R ±100×10−6/K
• Filletless products (The soldering part of this product is
only a bottom electrode)
• Suitable for reflow soldering (Not suitable for
flow soldering)
• Products meet EU RoHS requirements
dimensions and construction
TLR1E
Protective Bottom Coating
L
W
t
Resistive
d
Element _{Electrode Ni Sn}
TLR2A
W
Protective Bottom Coating
L
t
Resistive
d
Element Electrode Ni Sn
Size
Code
TLR1E
(0402)
TLR2A
(0805)
Resistance
10mΩ
5mΩ
6mΩ
7mΩ
8mΩ
9mΩ
10mΩ
Dimensions inches (mm)
L
W
d
t
.039±.002 .020±.002 .012±.004 .010±.004
(1.00±0.05) (0.50±0.05) (0.30±0.10) (0.25±0.10)
.026±.008
(0.65±0.20)
.022±.008 .012±.006
(0.55±0.20) (0.30±0.15)
.020±.008
(0.50±0.20)
.079±.008 .049±.008 _.020±.008
(2.00±0.20) (1.25±0.20) _{(0.50±0.20)}
.018±.008 .016±.006
(0.45±0.20) (0.26±0.15)
.014±.008
(0.35±0.20)
ordering information
New Part #
TLR
1E
D
Type
Power
Rating
1E: 0.2W
2A: 1W
Termination
Material
T: Sn
TP
Packaging
TP: 2mm pitch punch paper
TD: 4mm pitch punch paper
2L00
Nominal
Resistance
F: 4 digits
G, J: 3 digits
F
Resistance
Tolerance
F: ±1%
G: ±2%
J: ±5%
For further information on packaging,
please refer to Appendix A.
44
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/08/13
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: [phone] • www.koaspeer.com