KL32TTE Datasheet, PDF (1/8 Pages) KOA Speer Electronics, Inc. – Chip Inductors

Chip Inductors
Type KL32 Series
TN-100 R3
AHA 10/13/06
CERTIFIED
CERTIFIED
1. Scope
This specification applies to Chip Inductors (KL32)
produced by KOA Corporation.
2. Type Designation
The type designation shall be the following form:
KL
Type
32
T
Size
Termination
Material
TE
Packaging
1210
T: Sn
(Other termination
styles available,
contact factory
for options)
TE: 7" embossed plastic
(2,000 pieces/reel)
TED: 10" embossed plastic
(4,000 pieces/reel)
101
Nominal
Inductance
Reference
inductance
marking chart
J
Tolerance
J: ±5%
K: ±10%
M: ±20%
3. Dimensions and Construction
L
W1
th
d Magnet Ferrite
W2
Wire
Core
Molded
Resin
Electrode
Type
KL32
Dimensions inches (mm)
L
W1
W2
t
h
d
.126±.008 .098±.008 .067±.004 .087±.008 .075±.004 .02 nominal
(3.2±0.2) (2.5±0.2) (1.7±0.1) (2.2±0.2) (1.9±0.1) (.5 nominal)
Inductance Marking
Value
0.005µH - 0.082µH
0.10µH - 8.2µH
10µH - 330µH
Code
005 - 082
R10 - 8R2
R indicates decimal point.
100 - 331
1st two figures are significant,
the last figure indicates the
number of zeros to follow.
PAGE 1 OF 8
Bolivar Drive ^■ P.O. Box 547 ^■ Bradford, PA 16701 ^■ USA ^■ 814-362-5536 ^■ Fax [phone] ^■ www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.