CC10 Datasheet, PDF (1/2 Pages) Allied Components International – Ceramic Core Chip Inductors

CC
zero ohm melf resistor
EU
features
• Extremely low resistance
• Higher electrode strength and lower current noise
ratio than flat chip resistors
• Marking: Blue body color with no marking
• Products with lead-free terminations meet EU RoHS
requirements. EU RoHS regulation is not intended for
Pb-glass contained in electrode, resistor element and glass.
• AEC-Q200 Qualified: CC12M, CC25 only
dimensions and construction
L
C
D3
D1 D2
Insulation Resistive Ceramic End
Coating Film
Core
Cap
Type
Dimensions inches (mm)
(Inch/DIN Size Code)
L
C
D1 D2 (max.) D3 (max.)
CC10
.079±.004 .012 .049±.002 .053
(0805/0102) (2.0±0.1) (0.3 min.) (1.25±0.05) (1.35)
.003
(0.07)
CC12M
.138±.008 .02 ~ .035 .055±.004 .061
.004
(1406/0204) (3.5±0.2) (0.5 ~ 0.9) (1.4±0.1) (1.55)
(0.1)
CC20
.126±.008 .02 .061±.006 .069
.004
(1206/0203) (3.2±0.2) (0.5 min.) (1.55±0.15) (1.75)
(0.1)
CC25
.232±.008 .02 .087±.004 .094
(2309/0207) (5.9±0.2) (0.5 min.) (2.2±0.1) (2.4)
.006
(0.15)
ordering information
New Part #
CC
Type
10
Size Code
10: (0805)
12M: (1406)
20: (1206)
25: (2309)
T
Termination
Material
T: Sn
TE
Packaging
TE: 7" embossed plastic
For further information on packaging,
please refer to Appendix A.
80
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
12/17/12
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: [phone] • www.koaspeer.com