SPQ0410HR5H-B Datasheet, PDF (9/11 Pages) Knowles Electronics – Slim UltraMini SiSonicTM Microphone

SPQ0410HR5H-B
10. ADDITIONAL NOTES
(A) MSL (moisture sensitivity level) Class 1.
(B) Maximum of 3 reflow cycles is recommended.
(C) In order to minimize device damage:
 Do not board wash or clean after the reflow process.
 Do not brush board with or without solvents after the reflow process.
 Do not directly expose to ultrasonic processing, welding, or cleaning.
 Do not insert any object in port hole of device at any time.
 Do not apply over 30 psi of air pressure into the port hole.
 Do not pull a vacuum over port hole of the microphone.
 Do not apply a vacuum when repacking into sealed bags at a rate faster than 0.5 atm/sec.
11. MATERIALS STATEMENT
Meets the requirements of the European RoHS directive 2011/65/EC as amended.
Meets the requirements of the industry standard IEC 61249-2-21:2003 for halogenated
substances and Knowles Green Materials Standards Policy section on Halogen-Free.
Ozone depleting substances are not used in the product or the processes used to make the
product, including compounds listed in Annex A, B, and C of the “Montreal Protocol on
Substances That Deplete the Ozone Layer.”
Revision: D
Sheet 9 of 11
3/27/2013
©2013 Knowles Electronics