5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

KI ^{SEMICONDUCTOR}
TRANSIENT VOLTAGE SUPPRESSOR
FEATURES
Plastic package
Glass passivated junction
5000W peak pulse power capability with a 10/1000μs
waveform
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ps from
0 Volts to BV
Typical I_R less than 10µ A for V_(BR)10V
High temperature soldering guaranteed:265 / 10 seconds,
0.375"(9.5mm) lead length, 5 lbs. (2.3kg) tension
MECHANICAL DATA
Case:JEDEC R-6, molded plastic
Polarity: Color band denotes positive end (cathode)
except bipola
Weight: 0.07ounce, 2.1gram
Mounting position: any
5KP---SERIES
BREAKDOWN VOLTAGE: 5.0 - 220 V
PEAK PULSE POWER: 5000 W
R-6
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bidirectional use C or CA suffix for types 5KP5.0 thru types 5KP220 (e.g. 5KP5.0C , 5KP220CA)
Electrical characteristics apply in both directions
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
SYMBOL
Peak power dissipation with a 10/1000μs waveform(NOTE1, FIG.1)
PPPM
Peak pulse current with a 10/1000μs waveform(NOTE1)
IPPM
Steady state power dissipation at TL=75
fffffLead lengths 0.375"(9.5mm) (NOTE 2)
PM(AV)
Peak forward surge current, 8.3ms single half
ffffSine-wave superimposed on rated load (JEDEC Method) (NOTE 3)
IFSM
Maximum instantaneous forward voltage at 25A for unidirectional only (NOTE 4)
VF
Operating junction and storage temperature range
TJ, TSTG
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2
(2) Mounted on copper pad area of 0.8×0.8" (20×20mm) per Fig. 5.
(3)8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
VALUE
Minimum 5000
SEE TABLE 1
8.0
400
3.5
-55---+175
UNIT
W
A
W
A
V
Document Number 0285004
KISEMICONDUCTOR
1.