KBU6005-KBU610 Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 6.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes

Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
KBU6005 THRU KBU610
Single Phase 6.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 6.0 Amperes
FEATURES
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%
SYMBOLS
KBU
6005
KBU
601
KBU
602
KBU
604
KBU
606
KBU
608
KBU
610
UNITS
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
VRRM
50 100 200 400 600 800 1000
V
VRMS
35
70 140 280 420 560 700
V
VDC
50 100 200 400 600 800 1000
V
Maximum Average Forward Rectified Current
I(AV)
6.0
A
at TA=65℃
Peak Forward Surge Current,
8.3ms Single Half Sine-wave Superimposed on
IFSM
175
A
Rated Load (JEDEC method )
Maximum Instantaneous Forward Voltage at 6.0A
VF
Maximum DC Reverse Current @ TA=25℃
IR
Rated DC Blocking voltage per leg TA=125℃
1.0
V
5.0
μA
500
Typical Thermal Resistance (Note1)
(Note2)
RθJA
RθJC
8.6
℃/W
3.1
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note: 1.Thermal Resistance from Junction to Ambient with units in Free Air, P.C.B. Mounted on 0.5×0.5”(12×12mm) Copper Pads,0.375”
(9.5mm)Lead Length.
2. Thermal Resistance from Junction to Case with units Mounted on 2.6×1.4×0.06”Thick(6.5×3.5×0.15cm)Al.Plate.
1