KBPC6005-KBPC610 Datasheet, PDF (1/2 Pages) Kingtronics International Company – SINGLE-PHASE BRIDGE RECTIFIER REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 6.0 Ampere

KBPC6005 THRU
KBPC610
SINGLE-PHASE BRIDGE RECTIFIER
REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 6.0 Ampere
FEATURES
High Current Capability
High Case Dielectric Strength
High Surge Current Capability
Ideal for Printed Circuit Board Application
Plastic Material has Underwriters Laboratory
Flammability Classification 94V-O
BR-6
MECHANICAL DATA
Case: Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: Marked on Body
Weight: 3.8 grams (approx.)
Mounting Position: Through Hole for #6 Screw
Mounting Torque: 5.0 Inch-pounds Maximum
Marking: Type Number
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified ,
Single phase, half wave, 60Hz, resistive or inductive load.
Dimensions in
inches and (millimeters)
For capacitive load derate current by 20%
PARAMETER
SYMBOL
KBPC
6005
KBPC KBPC KBPC KBPC KBPC KBPC
601 602 604 606 608 610
UNIT
Peak Repetitive Reverse Voltage
VRRM
Working Peak Reverse Voltage
VRRM
50
100 200 400 600 800 1000
V
DC Blocking Voltage
V_R
RMS Reverse Voltage
V_R（RMS）
35
Average Rectified Output Current (Note 1)
Io
@TC = 50°C
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
IFSM
(JEDEC Method)
Forward Voltage (per element) @IF = 3.0A
V_FM
70
140 280 420 560 700
V
60
A
125
A
1.0V
Peak Reverse Current
@TC = 25°C
IR
At Rated DC Blocking Voltage @TC = 100°C
I²t Rating for fusing (t < 8.3ms) (Note 2)
I²t
5
uA
0.5
mA
64
A2S
Typical Junction Capacitance (Note 3)
C_J
Typical Thermal Resistance (Note 4)
RθJC
55
pF
12.5
K/W
Operating and Storage Temperature Range
T_J,TSTG
-65 to +125
℃
1- Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2- Device mounted on 75mm x 75mm x 1.6mm Cu Plate Heatsink.
3- Mounted on metal chassis. 4. Non-repetitive, for t > 1ms and < 8.3ms.
Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
1