KBP2005-KBP210 Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes

Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
KBP2005 THRU KBP210
Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 2.0 Amperes
FEATURES
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
250℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
KBP KBP KBP KBP KBP KBP KBP
2005 201 202 204 206 208 210
Maximum Repetitive Peak Reverse Voltage
VRRM 50 100 200 400 600 800 1000
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700
Maximum DC blocking Voltage
VDC 50 100 200 400 600 800 1000
Maximum Average Forward Rectified Current @TA = 50℃
I(AV)
2.0
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
60
Load (JEDEC method )
Maximum Instantaneous Forward Voltage @ 3.14A
VF
1.2
Maximum DC Reverse Current @ TA=25℃
IR
rated DC blocking voltage per leg TA = 125℃
10
500
RθJA
25
Typical Thermal Resistance (Note)
RθJL
8.0
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
NOTE： Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.47×0.47”(12×12mm)
Copper Pads
UNITS
V
V
V
A
A
V
μA
℃/W
℃
℃
1