GBU4005-GBU410 Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes

Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
GBU4005 THRU GBU410
FEATURES
Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 4.0 Amperes
GBU
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
250℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
GBU GBU GBU GBU GBU GBU GBU
4005 401 402 404 406 408 410
Maximum Repetitive Peak Reverse Voltage
VRRM 50 100 200 400 600 800 1000
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700
Maximum DC blocking Voltage
VDC
50 100 200 400 600 800 1000
Maximum Average Forward Rectified Current @TC = 100℃
I(AV)
4.0
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
150
Load (JEDEC method )
Maximum Instantaneous Forward Voltage @ 2.0A
1.0
VF
@ 4.0A
1.1
Maximum DC Reverse Current @ TA=25℃
IR
rated DC blocking voltage per leg TA = 125℃
50
500
Typical Thermal Resistance (Note1)
RθJA
20
(Note2)
RθJL
4.0
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
NOTE：1. Mounted on P.C.B. with 0.5×0.5”(12×12mm) Copper Pads,0.375”(9.5mm)Lead Length.
2. Mounted on Al. Plate of 2.0×3.0×0.25”Al-Plate Heatsink.
UNITS
V
V
V
A
A
V
μA
℃/W
℃
℃
1