DB101S-DB107S_16 Datasheet, PDF (1/2 Pages) Kingtronics International Company – SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere

DB101S THRU
DB107S
SINGLE-PHASE GLASS PASSIVATED SILICON SURFACE MOUNT BRIDGE RECTIFIER
REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere
FEATURES
DBS
Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
High surge overload rating of 50 Amperes peak
Ideal for printed circuit board
Glass passivated chip junction
MECHANICAL DATA
Case: Molded plastic, DBS
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-202, method 208
guaranteed
Mounting position: Any
Weight: 0.02ounce, 0.4gram
MAXIMUM RATINGS AND ELECTRICAL
CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified ,
Single phase, half wave, 60Hz, resistive or inductive load.
Dimensions in
inches and (millimeters)
For capacitive load derate current by 20%
PARAMETER
SYMBOL DB101S DB102S DB103S DB104S DB105S DB106S DB107S UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100 200 400 600 800 1000 Volts
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
50 100 200 400 600 800 1000 Volts
Maximum Average Forward
I(AV)
Rectified Current at TA=40℃ (Note 2)
1.0
Amps
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
IFSM
30
Amps
method)
Maximum Forward Voltage at 1.0A DC and 25℃
VF
1.1
Volts
Maximum Reverse Current
TA = 25℃
IR
at Rated DC Blocking Voltage
TA = 125℃
5.0
uA
500
Typical Junction Capacitance (Note 1)
CJ
25
pF
Typical Thermal Resistance (Note 2)
RθJA
40
℃/W
Typical Thermal Resistance (Note 2)
RθJL
15
℃/W
Operating and Storage Temperature Range
TJ,Tstg
-55 to +150
℃
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Units mounted on P.C.B. with 0.5 x 0.5" (13 x 13mm) copper pads
Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
1