DB101S-DB107S Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Amperes

Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
DB101S THRU DB107S
Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 1.0 Amperes
FEATURES
◆Ideal for printed circuit board
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%
DB DB DB DB DB DB DB
SYMBOLS
101S 102S 103S 104S 105S 106S 107S
UNITS
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
VRRM
50 100 200 400 600 800 1000
V
VRMS
35 70 140 280 420 560 700
V
VDC
50 100 200 400 600 800 1000
V
Maximum Average Forward Rectified Current
I(AV)
1.0
A
at TA=40℃
Peak Forward Surge Current,
8.3ms Single Half Sine-wave Superimposed on
IFSM
50
A
Rated Load (JEDEC method )
Maximum Instantaneous Forward Voltage at 1.0A
VF
Maximum DC Reverse Current @ TA=25℃
IR
rated DC blocking voltage per leg TA=125℃
1.1
V
10
μA
500
Typical Thermal Resistance (Note)
RθJA
RθJL
40
℃/W
15
Operating Temperature Range
TJ
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.with 0.47×0.47”(12×12mm) Copper Pads.
1