DB101-DB107_16 Datasheet, PDF (1/2 Pages) Kingtronics International Company – SURFACE MOUNT FAST SWITCHING RECTIFIER REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere

DB101 THRU
DB107
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER
REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere
FEATURES
DB
Plastic material has Underwriters Laboratory
Flammability Classification 94V-0.
High surge overload rating of 50 Amperes peak.
Ideal for printed circuit board.
Glass passivated chip junction.
MECHANICAL DATA
Case: Molded plastic, DB.
Epoxy: UL 94V-O rate flame retardant.
Terminals: Leads solderable per MIL-STD-202, method 208 guaranteed.
Mounting position: Any.
Weight: 0.02ounce, 0.4gram.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified ,
Single phase, half wave, 60Hz, resistive or inductive load.
Dimensions in
inches and (millimeters)
For capacitive load derate current by 20%
PARAMETER
SYMBOL DB101 DB102 DB103 DB104 DB105 DB106 DB107 UNIT
Maximum Recurrent Peak Reverse Voltage VRRM
50
100
200
400
600 800 1000 V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600 800 1000 V
Maximum Average Forward
Rectified Current at T_A=40℃
I(AV)
1.0
A
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC
IFSM
30
A
method)
Maximum forward Voltage at 1.0A DC and
25℃
V_F
Maximum DC Reverse Current at T_A=25℃
at Rated DC Blocking voltage T_A=125℃
IR
1.1
V
5.0
500
uA
Typical Junction Capacitance (Note 1)
C_J
25
pF
Typical Thermal Resistance (Note 2)
RθJC
40
℃/W
Typical Thermal Resistance (Note 2)
RθJL
15
℃/W
Operating and Storage Temperature Range T_J , TSTG
-55 to +150
℃
1- Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2- Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13 x 13mm) copper
pads.
Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
1