D3UB05_15 Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers

D3UB05 THRU
D3UB100
FEATURES
Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 3.0 Amperes
Package: D3K
◆Ideal for printed circuit boards
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃ / 10 seconds
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked on body
◆Mounting Torque: 0.8N·m
◆Recommended Torque: 0.5N·m
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
D3UB D3UB D3UB D3UB
05
10
20
40
D3UB
60
D3UB
80
D3UB
100
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800 1000
UNITS
V
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward
TC= 100℃
Rectified Current at
TA= 40℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 3A
VRMS
35
VDC
50
IF(AV)
IFSM
VF
70
140
280
420
560
700
V
100
200
400
600
800
1000
V
3.0⁽¹⁾
2.0⁽²⁾
A
60
A
1.1
V
Rating for fusing (3ms≤t<8.3ms) Tj=25℃
Maximum DC Reverse Current @ TA=25℃
rated DC blocking voltage per leg TA = 125℃
Typical Thermal Resistance (Note)
Operating Temperature Range
I²t
IR
RθJA
RθJL
TJ
15
5.0
500
40
15
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
NOTE：1. Unit case mounted on 1.6*1.6*0.06” thick (5.1*5.1*0.15cm) Al.Plate
2. Unit mounted on P.C.B. with 0.5*0.5” (12.7*1.27mm) copper pads and 0.375” (9.5mm) lead length
A²sec
μA
℃/W
℃
℃
Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
1