D3UB05-THRU-D3UB100_15 Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 3.0 Amperes

D3UB05 THRU
D3UB100
FEATURES
Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 3.0 Amperes
Package: D3K
◆Ideal for printed circuit boards
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃ / 10 seconds
◆UL Recognized File number: E347214
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked on body
◆Mounting Torque: 0.8N·m
◆Recommended Torque: 0.5N·m
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
D3UB D3UB D3UB D3UB
05
10
20
40
D3UB
60
D3UB
80
D3UB
100
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800 1000
UNITS
V
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward
TC= 100℃
Rectified Current at
TA= 40℃
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 3A
VRMS
35
VDC
50
IF(AV)
IFSM
VF
70
140
280
420
560
700
V
100
200
400
600
800
1000
V
3.0⁽¹⁾
2.0⁽²⁾
A
60
A
1.1
V
Rating for fusing (3ms≤t<8.3ms) Tj=25℃
Maximum DC Reverse Current @ TA=25℃
rated DC blocking voltage per leg TA = 125℃
Typical Thermal Resistance (Note)
Operating Temperature Range
I²t
IR
RθJA
RθJL
TJ
15
5.0
500
40
15
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
NOTE：1. Unit case mounted on 1.6*1.6*0.06” thick (5.1*5.1*0.15cm) Al.Plate
2. Unit mounted on P.C.B. with 0.5*0.5” (12.7*1.27mm) copper pads and 0.375” (9.5mm) lead length
A²sec
μA
℃/W
℃
℃
Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
1