D2UB05-THRU-D2UB100_15 Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes

D2UB05 THRU
D2UB100
Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 2.0 Amperes
FEATURES
◆Ideal for printed circuit boards
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃/10 seconds
◆UL Recognized File number: E347214
Package: D3K
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked on body
◆Mounting Torque: 0.8N·m
◆Recommended Torque: 0.5N·m
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
D2UB D2UB D2UB D2UB D2UB D2UB D2UB
UNITS
05
10
20
40
60
80 100
Maximum Repetitive Peak Reverse Voltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC blocking Voltage
VDC
50
Maximum Average Forward
Rectified Current at
TC= 100℃
TA= 40℃
IF(AV)
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load (JEDEC method) ^IFSM
100
200
400
600
70
140
280
420
100
200
400
600
2.0⁽¹⁾
1.0⁽²⁾
35
Maximum Instantaneous Forward Voltage @ 2A
VF
1.1
Rating for fusing (3ms≤t<8.3ms) Tj=25℃
I²t
3.5
Maximum DC Reverse Current @ TA=25℃
IR
5.0
RθJA
40
Typical Thermal Resistance (Note)
RθJC
3.5
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
NOTE：1. Unit case mounted on 1.6*1.6*0.06” thick (5.1*5.1*0.15cm) Al.Plate
2. Unit mounted on P.C.B. with 0.5*0.5” (12.7*1.27mm) copper pads and 0.375” (9.5mm) lead length
800 1000
V
560
700
V
800 1000
V
A
A
V
A²sec
μA
℃/W
℃
℃
Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
1