D2UB05-THRU-D2UB100 Datasheet, PDF (1/2 Pages) Kingtronics International Company – Single Phase 2.0 AMPS.Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes

Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
D2UB05 THRU D2UB100
Single Phase 2.0 AMPS.Glass Passivated Bridge Rectifiers
Voltage Range 50 to 1000 Volts Current 2.0 Amperes
FEATURES
◆Ideal for printed circuit boards
◆Reliable low cost construction technique
results in inexpensive product
◆High temperature soldering guaranteed:
260℃/10 seconds
Package:D3K
MECHANICAL DATA
◆Case: Molded plastic
◆Lead: solder plated
◆Polarity: As marked on body
◆Mounting Torque: 0.8N·m
◆Recommended Torque: 0.5N·m
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
D2UB D2UB D2UB D2UB D2UB D2UB D2UB
UNITS
05
10
20
40
60
80 100
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800 1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC blocking Voltage
Maximum Average Forward TC= 100℃
Rectified Current at
TA= 40℃
VDC
50
100
200
400
600
800 1000
V
2.0⁽¹⁾
IF(AV)
A
1.0⁽²⁾
Peak Forward Surge Current, 8.3 ms Single
IFSM
35
A
Half Sine-wave Superimposed on Rated Load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 2A
VF
1.1
Rating for fusing (3ms≤t<8.3ms) Tj=25℃
I²t
3.5
Maximum DC Reverse Current @ TA=25℃
5.0
IR
rated DC blocking voltage per leg TA = 125℃
500
RθJA
40
Typical Thermal Resistance (Note)
RθJC
3.5
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
NOTE：1.Unit case mounted on 1.6*1.6*0.06” thick (5.1*5.1*0.15cm) Al.Plate
-55 to +150
2.Unit mounted on P.C.B. with 0.5*0.5” (12.7*1.27mm) copper pads and 0.375” (9.5mm) lead length
V
A²sec
μA
℃/W
℃
℃
1