1A1-1A7_16 Datasheet, PDF (1/2 Pages) Kingtronics International Company – General Purpose Plastic Rectifier REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere

1A1 THRU 1A7
General Purpose Plastic Rectifier
REVERSE VOLTAGE 50 to 1000 Volts FORWARD CURRENT 1.0 Ampere
FEATURES
R-1
Low forward voltage drop
Low leakage current
High forward surge capability
High temperature soldering guaranteed
260℃/10 seconds,0.375”(9.5mm)lead length at 5 lbs(2.3kg) tension
MECHANICAL DATA
Case: Transfer molded plastic
Epoxy: UL94V-0 rate flame retardant
Polarity: Color band denotes cathode end
Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified ,
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
Dimensions in inches and (millimeters)
SYMBOL 1A1 1A2 1A3 1A4 1A5 1A6 1A7 UNIT
Maximum Repetitive Peak Reverse Voltage
VRRM
50 100 200 400 600 800 1000 VOLTS
Maximum RMS Voltage
VRMS
35 70 140 280 420 560 700 VOLTS
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current(FIG.1)
0.375”(9.5mm) lead length at T_A=25℃
Peak Forward Surge Current, 8.3 ms Single half sine-wave
superimposed on rated load (JEDEC method )
VDC
50 100 200 400 600 800 1000 VOLTS
I(AV)
1.0
Amps
IFSM
30
Amps
Maximum Instantaneous Forward Voltage @ 1.0A
V_F
1.1
Volts
Maximum DC Reverse Current at Rated
DC Blocking voltage
T_A = 25℃
T_A = 100℃
IR
5.0
100
Typical Junction Capacitance (NOTE 1)
C_J
25
Typical Thermal Resistance (NOTE 2)
R_θJA
60
Operating and Storage Temperature Range
T_J, TSTG
-55 to +150
1- Measured at 1.0MHz and applied reverse voltage of 4.0 Volts.
2-Thermal Resistance from Junction to Ambient at. 375”(9.5mm)lead length, P.C. board mounted.
uA
pF
℃/W
℃
Website: www.kingtronics.com Email: [e-mail] Tel: [phone] Fax: [phone]
1