AA2734ESGC_05 Datasheet, PDF (5/5 Pages) Kingbright Corporation – 2.7x3.4mm SURFACE MOUNT LED LAMP

AA2734ESGC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD1240
APPROVED: J. Lu
REV NO: V.3
CHECKED: Allen Liu
DATE: MAY/04/2005
DRAWN: S.H.CHEN
PAGE: 5 OF 5
ERP: 1201000048