KD83 Datasheet, PDF (4/24 Pages) Kingbright Corporation – LCD Driver

King Billion Electronics Co., Ltd
駿億電子股份有限公司
KD83
LCD Driver Series
No. Pad Name X-Coord. Y-Coord. No. Pad Name X-Coord. Y-Coord.
14
SEG[5]
-1939.7 -1053.7 65 SEG[55] 1691.3 942.1
15
SEG[4]
-1824.7 -1053.7 66 SEG[54] 1576.3 942.1
16
SEG[3]
-1709.7 -1053.7 67 SEG[53] 1461.3 942.1
17
SEG[2]
-1594.7 -1053.7 68 SEG[52] 1346.3 942.1
18
SEG[1]
-1479.7 -1053.7 69 SEG[51] 1231.3 942.1
19
SEG[0]
-1364.7 -1053.7 70 SEG[50] 1116.3 942.1
20
LVP
-1249.7 -1053.7 71 SEG[49] 1001.3 942.1
21
LVL5
-1134.7 -1053.7 72 SEG[48]
886.3 942.1
22
LVL3
-1019.7 -1053.7 73 SEG[47]
771.3 942.1
23
LVL2
-904.7 -1053.7 74 SEG[46]
656.3 942.1
24
LFR
-791.7 -1053.7 75 SEG[45]
541.3 942.1
25
CCK
-680.7 -1053.7 76 SEG[44]
426.3 942.1
26
REN
-569.7 -1053.7 77 SEG[43]
311.3 942.1
27
R_WN
-458.7 -1053.7 78 SEG[42]
196.3 942.1
28
D_CN
-347.7 -1053.7 79 SEG[41]
81.3
942.1
29
STBN
-236.7 -1053.7 80 SEG[40] -144.7 942.1
30
GND
-14.7 -1053.7 81 SEG[39] -259.7 942.1
31
RD[7]
96.3 -1053.7 82 SEG[38] -374.7 942.1
32
RD[6]
207.3 -1053.7 83 SEG[37] -489.7 942.1
33
RD[5]
318.3 -1053.7 84 SEG[36] -604.7 942.1
34
RD[4]
429.3 -1053.7 85 SEG[35] -719.7 942.1
35
RD[3]
540.3 -1053.7 86 SEG[34] -834.7 942.1
36
RD[2]
651.3 -1053.7 87 SEG[33] -949.7 942.1
37
RD[1]
762.3 -1053.7 88 SEG[32] -1064.7 942.1
38
RD[0]
873.3 -1053.7 89 SEG[31] -1179.7 942.1
39
RES_N
984.3 -1053.7 90 SEG[30] -1294.7 942.1
40
VDD
1095.3 -1053.7 91 SEG[29] -1409.7 942.1
41 SEG[79] 1319.3 -1053.7 92 SEG[28] -1524.7 942.1
42 SEG[78] 1434.3 -1053.7 93 SEG[27] -1639.7 942.1
43 SEG[77] 1549.3 -1053.7 94 SEG[26] -1754.7 942.1
44 SEG[76] 1664.3 -1053.7 95 SEG[25] -1869.7 942.1
45 SEG[75] 1779.3 -1053.7 96 SEG[24] -1984.7 942.1
46 SEG[74] 1894.3 -1053.7 97 SEG[23] -2099.7 942.1
47 SEG[73] 2009.3 -1053.7 98 SEG[22] -2214.7 942.1
48 SEG[72] 2124.3 -1053.7 99 SEG[21] -2329.7 942.1
49 SEG[71] 2239.3 -1053.7 100 SEG[20] -2444.7 942.1
50 SEG[70] 2354.3 -1053.7 101 SEG[19] -2559.7 942.1
51 SEG[69] 2483.45 -675.05
6. LCD Display RAM Map
The gray-scale LCD driver can be configured to be a 16 gray-scales, 4 gray-scales or black and white
display by programming GRAY_MODE field of command register. For 4 gray-scale displays, 2-bit of
RAM is required for each pixel and 4 bit for 16 gray-scale display, 1-bit for black and white display. For
different LCD configuration, the LCD display RAM is arranged differently. The following figure shows
October 31, 2003
4
V1.0