APT2012SGC Datasheet, PDF (4/4 Pages) Kingbright Corporation – Gallium Phosphide Green Light Emitting Diode.

APT2012SGC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA8210
APPROVED: J. Lu
REV NO: V.5
CHECKED: Allen Liu
DATE: MAR/19/2005
DRAWN: Y.W.WANG
PAGE: 4 OF 4
ERP:1203001868