APT2012MGC Datasheet, PDF (4/4 Pages) Kingbright Corporation – 2.0x1.25mm SMD CHIP LED LAMP

APT2012MGC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
SPEC NO: DSAA7633
APPROVED: J. Lu
REV NO: V.5
CHECKED: Allen Liu
DATE: MAR/12/2005
DRAWN: Y.CHENG
PAGE: 4 OF 4
ERP: 1203001819