AM27ID09 Datasheet, PDF (4/4 Pages) Kingbright Corporation – SUBMINIATURE SOLID STATE LAMP

AM27ID09
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength),the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
SPEC NO: DSAD1324
APPROVED: J. Lu
REV NO: V.4
CHECKED: Allen Liu
DATE: MAR/05/2005
DRAWN: W.J.ZHU
PAGE: 4 OF 4
ERP:1202000265