AAAF3529LSEEZGKQBKS Datasheet, PDF (3/8 Pages) Kingbright Corporation – 3.5x2.8mm SURFACE MOUNT LED LAMP

Selection Guide
Part No.
Emitting Color (Material)
Lens Type
Hyper Red (AlGaInP)
AAAF3529LSEEZGKQBKS Green (InGaN)
Water Clear
Blue (InGaN)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Iv (mcd) [2]
@ 2mA
Min. Typ.
10
20
80
180
12
30
Viewing
Angle [1]
2θ1/2
130°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Hyper Red
630
Green
515
Blue
460
nm
IF=2mA
λD [1]
Dominant Wavelength
Hyper Red
621
Green
525
Blue
465
nm
IF=2mA
Hyper Red
20
Δλ1/2
Spectral Line Half-width
Green
35
Blue
25
nm
IF=2mA
C
Capacitance
Hyper Red
25
Green
45
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
Green
Blue
1.8
2.1
2.65
3.1
V
2.65
3.1
IF=2mA
IR
Reverse Current
Hyper Red
Green
Blue
10
50
uA
50
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to CIE127-2007 standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Green
Blue
Power dissipation
105
93
93
DC Forward Current
50
30
30
Peak Forward Current [1]
195
150
150
Electrostatic Discharge Threshold (HBM)
3000
450
250
Reverse Voltage
5
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
Units
mW
mA
mA
V
V
SPEC NO: DSAO4457
APPROVED: Wynec
REV NO: V.3B
CHECKED: Allen Liu
DATE: JUL/07/2016
DRAWN: L.T.Zhang
PAGE: 3 OF 8
ERP: 1201009103