English
Language : 

AA3535SEL2Z4S Datasheet, PDF (3/6 Pages) Kingbright Corporation – Compatible with IR-reflow processes
Selection Guide
Part No.
Dice
Lens Type
Iv (cd) [2]
@ 150mA
Min.
Typ.
AA3535SEL2Z4S
Hyper Red (AlGaInP)
Water Clear
2.3
3.1
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.*LEDs are binned according to their luminous flux.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Φv (lm) [2]
@ 150mA*
Min. Typ.
10
13
Viewing
Angle [1]
2 θ 1/2
120 °
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Value
Unit
Power Dissipation
PD
450
mW
Junction Temperature [1]
TJ
110
°C
Operating Temperature
Top
-40 To +85
°C
Storage Temperature
Tstg
-40 To +85
°C
DC Forward Current [1]
IF
150
mA
Reverse Voltage
VR
5
V
Peak Forward Current [2]
Thermal Resistance [1]
(Junction/ambient)
Thermal Resistance [1]
(Junction/solder point)
IFM
Rth j-a
Rth j-S
270
mA
180
°C/W
50
°C/W
Electrostatic Discharge Threshold (HBM)
8000
V
Notes:
1.Results from mounting on PC board FR4(pad size ≥ 70mm2), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Value
Unit
Wavelength at peak emission IF=150mA [Typ.]
λ peak
640
nm
Dominant Wavelength IF=150mA [Typ.]
λ dom [1]
620
nm
Spectral Line Half-width IF=150mA [Typ.]
Δλ
25
nm
Forward Voltage IF=150mA [Min.]
Forward Voltage IF=150mA [Typ.]
Forward Voltage IF=150mA [Max.]
VF [2]
2.0
2.5
V
3.0
Allowable Reverse Current [Max.]
IR
85
mA
Temperature coefficient of λ peak
IF=150mA, -10 ° C≤ T≤100 ° C [Typ.]
TC λ peak
0.11
nm/° C
Temperature coefficient of λ dom
IF=150mA, -10 ° C≤ T≤100 ° C [Typ.]
TC λ dom
0.09
nm/° C
Temperature coefficient of VF
IF=150mA, -10 ° C≤ T≤100 ° C [Typ.]
TCV
-2.5
mV/° C
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4 .Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
SPEC NO: DSAO2934
APPROVED: WYNEC
REV NO: V.1B
CHECKED: Allen Liu
DATE: MAY/11/2015
DRAWN: L.Q.Xie
PAGE: 3 OF 6
ERP: 1201008722