AA3535SEL1Z1S-AMT Datasheet, PDF (3/7 Pages) Kingbright Corporation – 3.5x3.5 mm SMD CHIP LED LAMP

Selection Guide
Part No.
Dice
AA3535SEL1Z1S-AMT
Hyper Orange
(AlGaInP)
Lens Type
Water Clear
Iv (cd) [2]
@ 150mA
Code. Min. Max.
ZA
3.1
3.6
ZB
3.6
4.2
ZC
4.2
5
ZD
5
6
Φv (lm) [2]
@ 150mA*
Code. Min. Max.
A16
7.2
8.6
A17 8.6
10
B1
10
12
B2
12
14
Viewing
Angle [1]
2  1/2
120 
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.*LEDs are binned according to their luminous flux.
3. Luminous intensity/ luminous Flux value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Power Dissipation
Junction Temperature [1]
Operating Temperature
Storage Temperature
DC Forward Current [1]
Reverse Voltage
Peak Forward Current [2]
Thermal Resistance [1]
(Junction/ambient)
Thermal Resistance [1]
(Junction/solder point)
Symbol
PD
TJ
Top
Tstg
IF
VR
IFM
Rth j-a
Rth j-S
Value
510
130
-40 To +100
-40 To +115
150
5
270
240
100
Unit
mW
°C
°C
°C
mA
V
mA
°C/W
°C/W
Electrostatic Discharge Threshold (HBM)
8000
Notes:
1.Results from mounting on PC board FR4(pad size  70mm²), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Value
V
Unit
Wavelength at peak emission IF=150mA [Typ.]
 peak
626
nm
Dominant Wavelength IF=150mA [Min.]
dom [1]
615
nm
Dominant Wavelength IF=150mA [Max.]
dom [1]
635
nm
Spectral Line Half-width IF=150mA [Typ.]
Forward Voltage IF=150mA [Min.]
Forward Voltage IF=150mA [Typ.]
Forward Voltage IF=150mA [Max.]
Allowable Reverse Current [Max.]

VF [2]
IR
20
nm
2.4
2.9
V
3.4
85
mA
Temperature coefficient of  peak
IF=150mA, -10  C≤ T≤100  C [Typ.]
TC  peak
0.11
nm/ C
Temperature coefficient of  dom
IF=150mA, -10  C≤ T≤100  C [Typ.]
TC  dom
0.09
nm/ C
Temperature coefficient of VF
IF=150mA, -10  C≤ T≤100  C [Typ.]
TCV
-3.6
mV/ C
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceable to the CIE127-2007 compliant national standards.
4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
SPEC NO: DSAL4014
APPROVED: WYNEC
REV NO: V.7B
CHECKED: Allen Liu
DATE: JAN/26/2015
DRAWN: Q.M.Chen
PAGE: 3 OF 7
ERP: 1201008262