AA3021ES Datasheet, PDF (3/6 Pages) Kingbright Corporation – 3.0x2.0mm SURFACE MOUNT LED LAMP

Selection Guide
Part No.
Dice
Lens Type
AA3021ES
High Efficiency Red (GaAsP/GaP)
Water Clear
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
12
30
*8
*18
Viewing
Angle [1]
2θ1/2
125°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
High Efficiency Red
627
nm
IF=20mA
λD [1]
Dominant Wavelength
High Efficiency Red
617
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
10
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating Temperature
Storage Temperature
Note:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
High Efficiency Red
75
30
160
5
-40°C To +85°C
-40°C To +85°C
SPEC NO: DSAL0967
APPROVED: WYNEC
REV NO: V.6A
CHECKED: Allen Liu
DATE: APR/25/2015
DRAWN: Q.M.Chen
Units
mW
mA
mA
V
PAGE: 3 OF 6
ERP: 1201006921