AA2214SYSK Datasheet, PDF (3/6 Pages) Kingbright Corporation – 2.2x1.4mm SURFACE MOUNT LED LAMP

Selection Guide
Part No.
Dice
Lens Type
AA2214SYSK
Super Bright Yellow (AlGaInP)
Water Clear
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 20mA
Min. Typ.
120 250
Viewing
Angle [1]
2θ1/2
120°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
λpeak
Peak Wavelength
Super Bright Yellow
590
nm
IF=20mA
λD [1]
Dominant Wavelength
Super Bright Yellow
590
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Super Bright Yellow
20
nm
IF=20mA
C
Capacitance
Super Bright Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Yellow
2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating Temperature
Storage Temperature
Note:
1. 1 / 10 Duty Cycle, 0.1ms Pulse Width.
Super Bright Yellow
75
30
175
5
-40°C To +85°C
-40°C To +85°C
SPEC NO: DSAK2207
APPROVED: WYNEC
REV NO: V.4B
CHECKED: Allen Liu
DATE: APR/25/2015
DRAWN: Q.M.Chen
Units
mW
mA
mA
V
PAGE: 3 OF 6
ERP: 1201005727