WP76761CSEC-J Datasheet, PDF (2/4 Pages) Kingbright Corporation – 7.6mm x 7.6mm SUPER FLUX LED LAMP

Selection Guide
Part No.
Dice
Lens Type
Iv (mcd) [2]
@ 20mA *70mA
Min.
Typ.
WP76761CSEC/J HYPER ORANGE (AlGaInP)
WATER CLEAR
4700
*16000
13000
*45000
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. * Luminous intensity with asterisk is measured at 70mA under 40ms pulse width; Luminous intensity / luminous flux: +/-15%.
3.Drive current between 10mA and 30mA are recommended for long term performance.
4.Operation at current below 10mA is not recommended.
Viewing
Angle [1]
2θ1/2
20°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
λpeak
Peak Wavelength
λD [1]
Dominant Wavelength
∆λ1/2
Spectral Line Half-width
C
Capacitance
VF [2]
Forward Voltage
IR
Reverse Current
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Device
Hyper Orange
Hyper Orange
Hyper Orange
Hyper Orange
Hyper Orange
Hyper Orange
Typ.
640
630
25
27
2.2
Max.
2.8
10
Units
nm
nm
nm
pF
V
uA
Test Conditions
IF=20mA
IF=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Hyper Orange
84
30
150
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
Units
mW
mA
mA
V
SPEC NO: DSAG1668
APPROVED: J. Lu
REV NO: V.2
CHECKED: Allen Liu
DATE: JUN/16/2006
DRAWN: Y.L.LI
PAGE: 2 OF 4
ERP:1101018012