WP7113ID5V_13 Datasheet, PDF (2/7 Pages) Kingbright Corporation – The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.

Selection Guide
Part No.
Dice
Lens Type
WP7113ID5V
High Efficiency Red (GaAsP/GaP)
Red Diffused
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
V= 5V
Min. Typ.
20
40
*12
*25
Viewing
Angle [1]
2θ1/2
30°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
627
λD [1]
Dominant Wavelength
High Efficiency Red
617
Δλ1/2
Spectral Line Half-width
High Efficiency Red
45
IF
Forward Current
High Efficiency Red
13
IR
Reverse Current
High Efficiency Red
Note:
1.Wavelength: +/-1nm.
2.Wavelength value is traceable to the CIE127-2007 compliant national standards.
Max.
17.5
10
Units
nm
nm
nm
mA
uA
Test Conditions
VF=5V
VF=5V
VF=5V
VF=5V
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
Forward Voltage
Reverse Voltage
Operating Temperature
Storage Temperature
Lead Solder Temperature [1]
Lead Solder Temperature [2]
Notes:
1. 2mm below package base.
2. 5mm below package base.
High Efficiency Red
85
6
5
-40°C To +70°C
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
SPEC NO: DSAF2406
APPROVED: WYNEC
REV NO: V.4A
CHECKED: Allen Liu
DATE: MAR/30/2013
DRAWN: Q.M.Chen
Units
mW
V
V
PAGE: 2 OF 6
ERP: 1101005047