WP710A10SGD5V Datasheet, PDF (2/7 Pages) Kingbright Corporation – The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.

Selection Guide
Part No.
Dice
Lens Type
WP710A10SGD5V
Super Bright Green (GaP)
Green Diffused
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
V= 5V
Min. Typ.
10
25
Viewing
Angle [1]
2θ1/2
40°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Green
565
λD [1]
Dominant Wavelength
Super Bright Green
568
Δλ1/2
Spectral Line Half-width
Super Bright Green
30
IF
Forward Current
Super Bright Green
11.5
IR
Reverse Current
Super Bright Green
Notes:
1.Wavelength: +/-1nm.
2.Wavelength value is traceable to the CIE127-2007 compliant national standards.
Max.
17.5
10
Units
nm
nm
nm
mA
uA
Test Conditions
VF=5V
VF=5V
VF=5V
VF=5V
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
Forward Voltage
Reverse Voltage
Operating Temperature
Storage Temperature
Lead Solder Temperature [1]
Lead Solder Temperature [2]
Notes:
1. 2mm below package base.
2. 5mm below package base.
Super Bright Green
85
6
5
-40°C To +70°C
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
SPEC NO: DSAL0546
APPROVED: WYNEC
REV NO: V.4B
CHECKED: Allen Liu
DATE: MAR/21/2013
DRAWN: F.Cui
Units
mW
V
V
PAGE: 2 OF 6
ERP: 1101029231